PONAR ŻYWIEC FORMOPLAST FO 1400 / 330B injection molding machine was built in 1994. The machine has a clamping force of 330 tons. A screw with a diameter of 70 mm moves at a possible speed of 50-110 rpm. The surface of the plate for fixing the mold is 790×790 mm, and the clearance between the columns is 500×500 mm.
Technical parameters of the PONAR ŻYWIEC FORMOPLAST FO 1400 / 330B injection molding machine
– clamping force: 330 T.
– screw diameter: 70 mm
– auger stroke: 290
– screw length: 1050 mm
– screw rotation speed: 50-110 min-1
– injection pressure: 1275 MPa
– installed injection power: 42 kW
– Design injection stroke volume: 1281
– maximum weight of the fitting for polystyrene: 1010 g
– plasticizing capacity: 170 kg / h
– torque: 3950 Nm
– plasticizing efficiency: 170
– maximum mold opening path: 660
– maximum height of the mold: 590
– dimensions of the plate for fixing the mold: 790 x 790 mm
– clearance between columns: 500 x 500 mm
– maximum mechanical ejector stroke: 150
– maximum pressure in the hydraulic system: 175 atm
– number of dry cycles: 900/1 h.
– cylinder heating capacity installed: 18.6 kW
– number of cylinder heating zones: 5 pcs.
– engine speed: 1480 rpm.
– electric motor power: 45 kW
– weight of the injection molding machine: 10.5 t