AGIE AGIECUT CLASSIC 2S wire EDM machine was built in 2004 in Austria. The machine uses automatically threaded wire with a maximum diameter of 0.33 mm for machining workpieces based on electrical erosion, allowing complex and difficult shapes to be obtained. The machining process is performed in X/Y/Z axes with feeds of 350 mm (X axis), 250 mm (Y axis) and 256 mm (Z axis), on workpieces with maximum dimensions (L x W x H) of 750 x 550 x 250 mm and a weight of 450 kg. The total weight of the wire EDM machine is 2500 kg.
Technical specifications of the AGIE AGIECUT CLASSIC 2S EDM machine
- feeds in the X/Y/Z axis: 350/250/256 mm
- feeds of auxiliary table U/V: 70/70 mm
- maximum workpiece length: 750 mm
- maximum workpiece width: 550 mm
- maximum workpiece height: 250 mm
- maximum workpiece weight (immersion): 200 kg
- maximum workpiece weight (rinsing): 450 kg
- automatic wire threading
- minimum wire diameter: 0.2 mm
- maximum wire diameter: 0.33 mm
- wire tension: 0-25 N
- maximum taper thickness: 100 mm
- maximum taper angle: ± 30°
- conductor V: 0° – 2°
- power: 9 kVA
- rated current: 14 A
- power supply: 3x 400 V; 50 Hz
- dimensions (L x W x H): 2000 x 1700 x 2200 mm
- total weight of AGIECUT CLASSIC 2S machine: 2500 kg