The WMW HECKERT SABO STANDARD BS 63 column drilling machine was manufactured in Germany in the 1980s. Thanks to the drill, it is possible to perform various works related to metalworking, such as drilling in steel (with a maximum diameter of 63 mm), and in cast iron (with a maximum diameter of 80 mm). The machine has a work table with an area of 630×500 mm. Its vertical travel is 200 mm. Additionally, the drill is equipped with a cross table on which milling works can be performed. The distance of the spindle axis from the rack guides is 280 mm. The machine is also equipped with a boring bar, thanks to which it is possible to bore holes for larger diameters. In addition, the set includes a 3-jaw chuck with a threading sleeve (cone 5), a prism for drilling shafts, a vice (L-200), a head (fi 20), a drill chuck (fi 16), end mills and drills (various dimensions ), visible in the photo, reduction sleeves (set), tool cabinet and technical documentation.
Technical parameters of the drilling machine WMW HECKERT SABO STANDARD 63
– table working surface: 500 x 630 mm
– vertical table travel: 270 mm
– max. Drilling diameter in steel: 63 mm
– max. Drilling diameter in cast iron: 80 mm
– distance of the spindle axis from the stand guides: 280 mm
– distance of the spindle from the table surface: 0-710 mm
– vertical table travel: 200 mm
– vertical travel of the spindle: 280 mm
– Morsea spindle taper: 5
– number of spindle speeds: 12
– spindle speed range: 32-1400 rpm.
– number of spindle feeds: 9
– spindle feed range: 0.56-0.036 mm / rev
– number of T-slots in the table: 3
– engine power: 7.5 kW
– dimensions of the drill (length x width x height): 1200 x 770 x 3150 mm
– weight: 1660 kg
Column drilling machine accessories:
– cross table
– stipulated
– 3-jaw chuck with threading sleeve (cone 5)
– prism for drilling shafts
– vice (L-200)
– head: fi 20
– drill chuck: fi 16
– end mills and drills (various dimensions)
– reduction sleeves (set)
– tool cabinet
– Technical Documentation