ANAYAK PERFORMER 2000 CNC milling machine

ANAYAK PERFORMER 2000 CNC milling machine built in 2007 in Spain, uses a torsion milling head with automatic positioning in the A+B planes for precision machining of larger workpieces, weighing up to 5000 kg. The machining process is carried out on an easily accessible work table of the milling machine, with dimensions (L x W) of 2200 x 850 mm, in X,Y,Z axes with feed rates of 2000 (X axis), 1000 (Y axis) and 1000 (Z axis).

The CNC bed milling machine has a highly efficient spindle with two-stage speed adjustment from 60 to 3000 rpm, ensuring a significant reduction in milling time. The machine also features, among others, a control panel with HEIDENHAIN iTNC 530 CNC control, cooling through spindle and RENISHAW RMP60 workpiece probe. The CNC bed type milling machine weighs 14000 kg.

Technical parameters of the ANAYAK PERFORMER 2000 machining centre

• work table area (L x W): 2200 x 850 mm
• feed rates in the X/Y/Z axis: 2000/1000/1100 mm
• speed of feed rates in the X/Y/Z axis: 10000 mm/min
• rapid traverse in the X/Y/Z axis: 20000 mm/min
• minimum spindle speed: 60 rpm
• maximum spindle speed: 3000 rpm
• two-stage spindle speed adjustment
• maximum workpiece weight: 5000 kg
• indexing of the milling head: -180°/+177.5° every 2.5°
• positioning of milling head angles: automatic in A+B planes
• positioning accuracy: ±0.014 mm
• repeatability: ±0.008 mm
• motor power: 38 kW
• T-slot number: 5
• T-slot width: 22 mm
• T-slot spacing: 150 mm
• ball screw diameter in the X/Y/Z axis: 63 mm
• ball screw passage in the X/Y/Z axis: 16/10/10 mm
• working hours: 24368 h
• power of hydraulic unit: 1.8 kW
• working pressure of hydraulic unit: 110 bar
• capacity of hydraulic unit tank: 100 l
• capacity of hydraulic pump: 9 l/min
• cooling unit power: 1.36 kW
• air pressure: 6-7 bar
• air flow: 50-225 l/min
• power supply: 400 V; 50 Hz
• dimensions (L x W x H): 5500 x 4000 x 2900 mm
• total weight of the PERFORMER 2000 machine: 14000 kg

Equipment of the CNC milling machine

• CNC controller: HEIDENHAIN iTNC 530
• workpiece probe: RENISHAW RMP60
• torsion milling head
• machine spindle taper: ISO 50
• cooling through spindle
• DTR – technical and propulsory documentation