AGIE AGIECUT CLASSIC 2S wire EDM machine

The AGIE AGIECUT CLASSIC 2S wire EDM machine was manufactured in 2004 by AGIE in Switzerland. The use of an EDM machine is to machine a metal detail with electrical erosion to obtain complex or difficult-to-obtain shapes. The workpiece may have a maximum weight of 200 kg when immersed and 450 kg when rinsing, and the dimensions (L x W x H) are 750 x 550 x 250 mm. The machine is equipped with a cone with a maximum thickness of 100 mm, and its maximum angle is +/- 30 degrees. The wire of the EDM machine with an electrical voltage of 0 to 25 N has a diameter of 0.2 – 0.33 mm. The travel in the U / V axis is 70 mm, and in the X / Y / Z axes it is 350, 250 and 256 mm.

Specification of the AGIE AGIECUT CLASSIC 2S wire EDM machine

– maximum size of a detail (L x W x H): 750 x 550 x 250 mm
– maximum workpiece weight (immersion / rinsing): 200/450 kg
– maximum feeds in the X / Y / Z axes: 350/250/256 mm
– auxiliary table travel (U axis x V axis): 70 x 70 mm
– wire tension: 0 – 25 N
– wire diameter: 0.2 – 0.33 mm
– maximum cone angle: +/- 30 degrees
– maximum thickness of the cone: 100 mm
– V conductor: 0 degrees – 2 degrees
– operating voltage: 3x 400 V / 50Hz
– rated current: 14 A
– weight of the AGIECUT CLASSIC 2S machine: 2580 kg