AIDA NC2-160-2 eccentric press

The AIDA NC2-160-2 eccentric press was built in 2000 in England. The frame of the press is made of high quality sheet steel and has a high rigidity and counter-rotating design. The crankshaft, fitted in the press, is made of forged steel making it suitable for high stress machining.

The machine works with a pressing force of 160 tons. The slider makes between 30 and 55 strokes per minute. The slider of the eccentric press can be adjusted within a range of 70 mm, while its stroke is 230 mm. The flywheel mounted on the press journal, rotates at a maximum speed of 341.8 rpm. The machine AIDA NC2-160-2 weights 20000 kg.

Technical specifications of the AIDA NC2-160-2 machine

• pressing force: 160 t
• table dimensions (L x W): 2040 x 840 mm
• table working area (L x W): 1700 x 800 mm
• stroke of slider: 230 mm
• distance of slider from press table: 450 mm
• adjustment range of slider: 70 mm
• strokes per minute without load: 30 -55/min
• frame gap: 390 x 685 mm
• total response time: 109 ms
• counterweight value: 1000 kg
• maximum flywheel speed: 341.8 rpm
• motor power: 15 kW
• minimum air pressure: 0.5 Mpa
• total weight: 20 t