AMADA EMZ-3510 NT turret punching machine

AMADA EMZ-3510 NT turret punching machine was manufactured in France in 2012. The machine has a pressing force of 30 tons, which allows processing of material with a maximum thickness of 4.5 mm and a weight of 150 kg. The press is equipped with a revolver magazine with 45 tool stations (including 4 rotary ones). It runs at 30 rpm and has a tool change time of 1.5 seconds. It is equipped with FANUC AMNC – WINDOWS control. The machining range without an interception is 1270×2500 mm, and with an intercept is 5000×1270 mm. The machine is capable of making a maximum of 1000 strokes per minute during punching. It is offered with a wide range of equipment, including a set of tools, a AMADA TOGU tool sharpening machine and WILSON-WHEEL tool control.

Technical parameters of the AMADA EMZ-3510 NT turret punching machine

– currently worked time: 41 930 h
– punching force: 30 t
– maximum thickness of the processed material: 4.5 mm
– maximum product weight: 150 kg
– processing range: 2500 x 1270 mm
– machining range with an interception: 5000 x 1270 mm
– X axis speed: 100 m / min
– Y axis speed: 80 m / min
– speed of displacement of both axes (X, Y) simultaneously: 128 m / min
– revolver speed: 30 / min
– stroke frequency during punching: max. 1000 strokes / min
– stroke rate for outer surface labeling: 1800 strokes / min
– stroke rate at 25.4 mm hole spacing: 500 strokes / min
– tool stations: 45 stations (including 4 rotary stations)
– trapdoor in the table: 500 x 500 mm
– max. punching tool diameter: 114.3 mm
– tool change time: 1.5 sec.
– energy consumption: max. 7 kW / h, on average approx. 4-5 kW / h
– compressed air of the Air Jet Vakuum machine: 250 l / min
– machine weight: 22,000 kg

Technical data of the station – AMADEX:
– axis of rotation of angles: C axis
– program input: absolute
– direction of rotation: two-way (right / left)
– number of rotating tools: 4 pieces
– drive: AC servomotor
– maximum diameter with 2 rotating tools: 31.7 mm, corresponds to a rectangle of 30 x 6 mm
– maximum diameter with 2 rotating tools: 50.8 mm, corresponds to a rectangle of 50 x 10 mm
– rotational speed: 60 / min

Classification of turret tools:
– station A: max diameter 12.7 (24 pieces)
– station B: maximum diameter (12 pieces)
– C station: max diameter (2 pieces)
– D station: max diameter (1 piece)
– E station: max diameter (2 pieces)
– rotation B: maximum diameter (2 pieces)
– rotation C: max diameter (2 pieces)

Equipment of the AMADA EMZ-3510 NT turret punching machine

– FANUC AMNC – WINDOWS control
– Z-type 3-track revolver
– brush table
– electric servo drive “TWIN DRIVE”
– tool lubrication system, type AIR-BLOW
– control of WILSON-WHEEL tools
– VAKKUM suction system
– actuator for removing tools type C, D, E
– sheet waviness sensors
– 3 sheet metal clamps with stepless adjustment
– CD ROM, USB, 3,5 ”floppy disk drive, RJ45
– Toolkit
– tool housings of individual stations
– sets of cabinets and stands to facilitate the daily operation and changeover of the machine
– tool sharpening machine AMADA TOGU from 2011