AMADA LC-1212 ALPHA III laser cutting machine

AMADA LC-1212 ALPHA III laser cutting machine was built in 1999 in Japan by AMADA CO., LTD. The machine is used for precision machining of sheet metal with a maximum weight of 220 kg. Laser cutting is performed by means of a stable 2 kW laser beam, which guarantees the achievement of extremely smooth edges with no irregularities. All this is complemented by an advanced NC control and a laser source of the highest energy efficiency. The AMADA LC 1212 A3 laser cutting machine weighs 4500 kg.

Technical specifications of the AMADA LC-1212 ALPHA III laser

• laser power: 2 kW
• number of axes: 3 (X,Y,Z)
• feed in the X/Y/Z axis: 1270/1270/300 mm
• rapid traverse in the X/Y/Z axis: 80/80/60 m/min
• working speed: 20 m/min
• maximum sheet metal dimensions (L x W): 2540 x 1270 mm
• maximum sheet metal weight: 220 kg
• work table height: 820 mm
• positioning accuracy: ± 0.01 mm
• positioning repeatability: ± 0.005 mm
• machine switch-on time: 41681 h
• operating hours: 12064 h
• compressed air pressure: 0.95 MPa
• compressed air consumption: 250/1000 l/min
• ambient temperature: 5-35°C
• relative humidity: 75%
• power requirement: 43 kVA
• power supply: 3x 200 V; 50/60 Hz
• dimensions (L x W x H): 2240 x 3120 x 2275 mm
• weight of the LC-1212 ALPHA III machine: 4500 kg

Equipment of the AMADA LASMAC LC-1212 A3 laser

• NC control: FANUC FS-160iLA
• laser source: FANUC AF2000C
• RS232C interface

(The technical parameters given may differ slightly from reality. A verification with the actual capabilities of the offered machine is required.)