BMEI BV100 CNC vertical machining center

BMEI BV100 CNC vertical machining center was built in 2007 in China by BMEI CO., LTD. The machine is used for precision machining of workpieces with a maximum weight of 700 kg. The machining process is performed inside a large workspace, which has been fully maximised to ensure the freedom of performed operations. Inside it, there is a stable work table with a length of 1300 mm and a width of 610 mm and with five T-slots for quick and easy attachment of tooling. The spindle, driven by a high-powered motor, reaches a speed of as much as 15000 rpm and moves in three X,Y,Z axes with feeds of 1050 mm, 510 mm and 560 mm respectively. The capacious 21-position tool magazine, on the other hand, allows storage of a large number of tools with a maximum diameter of 160 mm. A short tool change time of just six seconds reduces machine downtime to a minimum. All this is complemented by an advanced FANUC CNC controller, in which even the most complex machining programmes are created in just a few steps. The BMEI BV 100 CNC machining center is offered with a TONGFEI cooling unit. The total weight of the machine is approximately 6500 kg.

Technical specifications of the BMEI BV100 CNC milling machine

• CNC controller: FANUC Series 0i-MC
• feed in the X/Y/Z axis: 1050/510/560 mm
• rapid traverse in the X,Y,Z axis: 24000 mm/min
• work feed rate: 3-15000 mm/min
• work table dimensions (L x W): 1300 x 610 mm
• maximum workpiece weight: 700 kg
• maximum spindle rotational speed: 15000 rpm
• minimum spindle rotational speed: 60 rpm
• spindle diameter: 70 mm
• spindle taper: 7/24 No 40
• distance from spindle end to work table surface: 152-712 mm
• distance from spindle axis to the front column: 563.4 mm
• 21-position tool magazine
• maximum tool diameter (adjacent positions occupied/adjacent positions empty): 80/160 mm
• maximum tool length: 304 mm
• maximum weight of a single tool: 6.8 kg
• maximum weight of all tools in the magazine: 68 kg
• tool change: free selection
• tool change time: 6 s
• number of T-slots: 5
• width of T-slots: 18 mm
• spacing of T-slots: 100×125 mm
• cooling device (chiller): TONGFEI
• LED lamp indicating machine status
• X,Y axis drive power: 3 kW
• Z axis drive power: 4 kW
• compressed air working pressure: 0.6 MPa
• main motor power: 18.5/22 kW
• power supply: 3x 400 V; 50 Hz
• dimensions (L x W x H): 3282 x 2347 x 3018 mm
• weight of the BMEI BV100 machine: approx. 6500 kg