DMG MORI CLX 350 V3 CNC turning center

DMG MORI CLX 350 V3 CNC turning center was built in 2017 in Poland by FAMOT Pleszew Sp. z.o.o. The machine, distinguished by the use of reliable components and modern solutions, is used for precision machining of workpieces with a maximum diameter of 610 mm. Inside the large working space, there is, among others, a 12-position turret and a specially constructed inclined bed, which effectively dampens any vibrations and oscillations generated during machining. All this is completed by the SIEMENS CNC control, in which advanced machining programmes are created in just a few steps. Throughout its lifetime, the CLX 350 CNC lathe has worked for a total of 9301 hours. The total weight of the machine is 4200 kg.

Technical specifications of the DMG MORI CLX 350 V3 lathe

• feed in the X/Z axis: 242.5/580 mm
• rapid traverse in the X/Z axis: 30/36 m/min
• maximum turning diameter: 320 mm
• recommended turning diameter: 250 mm
• turning diameter over bed: 610 mm
• turning diameter over slide: 400 mm
• maximum bar diameter: 51 mm
• turning length: 530 mm
• maximum spindle rotational speed: 5000 rpm
• spindle passage: 73 mm
• internal diameter of spindle front bearing: 120 mm
• spindle end: A2-6
• spindle drive power (40/100% ED): 16.5/11 kW
• spindle torque (40/100% ED): 168/112 Nm
• 30° turret rotation time (with locking): 0,95 s
• 30° turret rotation time (without locking): 0,4 s
• tool torque (40% ED): 15 Nm
• tailstock stroke: 500 mm
• tailstock sleeve socket: MK 4
• maximum axial tailstock clamping force: 4 kN
• operating hours: 9301 h
• chip collection tray capacity: 120 l
• chip conveyor capacity: 170 l
• hydraulic power unit capacity: approx. 10 l
• hydraulic unit maximum pressure: 55 bar
• compressed air pressure: 6 bar
• compressed air requirement: 15 m3/h
• coolant pump power: 0.85 kW
• coolant pump capacity (at 5 bar): 20 l/min
• maximum power requirement: 28 kVA
• power supply: 400 V; 50/60 Hz
• dimensions of machine with chip collection tray (L x W x H): approx. 2800 x 1780 x 1850 mm
• dimensions of the machine with chip conveyor, chip discharge on the right side (L x W x H): approx. 3680 x 1780 x 1850 mm
• weight of the DMG MORI CLX 350 V3 machine: 4200 kg

Equipment of DMG MORI turning center

• CNC controller: SIEMENS SINUMERIK
• 12-position turret with VDI 3425 toolholders
• lathe chuck fi 210 mm
• hydraulic tailstock controlled by M functions