DMG MORI NHX 6300 Horizontal Milling Center

The DMG MORI NHX 6300 Horizontal Milling Center was manufactured in 2018 by the Japanese company DMG Mori Seiki. The machine performs work on four controllable axes (X, Y, Z, B) with maximum travels of 1050 mm for the X axis, 900 mm for the Y axis and 1030 mm for the Z axis and allows for the processing of details with a diameter of 1050 mm and a height of 1300 mm and maximum weight 1.5 tons. The machining center is equipped with CNC DMG MORI ERGOline control, two pallets with a rotary pallet exchanger and magazine for 60 tools , exchanged in a very short time (2.05 s). The milling machine has a spindle with a maximum speed of 8000 rpm.

Technical parameters of the DMG MORI NHX 6300 horizontal milling center

– conversion of metric / inch values
– automatic door locking
– road limit sensors
– load monitoring function
– rapid traverse in the X / Y / Z axes: 60000/60000/60000 mm / min.
– working feed, using the look ahead function: 0-60,000 mm / min.
– feed in JOG mode: 0-5,000 mm / min.
– maximum tool length: 630 mm
– maximum tool weight: 30 kg
– tool change time (tool-tool: 2.05 s
– chip-to-chip tool change time, 60-position (ring type) MAS: 4.8 s
– coolant tank capacity: 1085 L
– coolant pump motor: 1.21 (1.61) kW (HP)
– distance between the table surface and the ground: 1250 mm
– pallet change time: 20 s
– pallet working area: 630 x 630 mm
– height from the ground: 3228 mm
– foundation area (width x depth): 3930 x 5823 mm
– maximum table load: 1500 kg
– maximum spindle speed: 8,000 min
– machine working time: 676 h
– programme operating time: 429 h

Accessories for the DMG MORI NHX 6300 machining center

– four steerable axes (X, Y, Z, B)
– two pallets and a rotary pallet exchanger
– CNC controller: DMG MORI ERGOline
– 60-position tool magazine with short tool change time