FAMOT EUROPA universal lathe

FAMOT EUROPA universal lathe built in 1996 in Poland is designed for taper stamping, thread cutting and both roughing and finishing machining of workpieces with a maximum diameter of 350 mm. The machine of stable construction is equipped with a high-speed spindle, allowing to perform on the machine both unit and series production with the highest precision regardless of the type of machined material. The FAMOT universal high-speed lathe weighs 1500 kg.

Technical data of the FAMOT EUROPA lathe

• machined materials: steel, non-ferrous metals, plastics
• maximum workpiece diameter (turning over bed): 350 mm
• maximum workpiece diameter (turning over the slide): 200 mm
• feed rate range in the X axis: 0.04-0.8 mm/rev
• number of feed rates in the X axis: 12
• feed rate range in the Z axis: 0,02-0,4 mm/rev
• number of feed rates in the Z axis: 12
• maximum spindle speed: 2500 rpm
• minimum spindle speed: 28 rpm
• number of spindle speed adjustment steps: 14
• spindle taper: Morse 6
• spindle clearance: 54 mm
• spindle torque: 300 Nm
• flange spindle end: PN-69/M-55052 C6 (DIN 6)
• travel of top support to spindle: 60 mm
• travel of top support from spindle: 55 mm
• tusk spacing: 1000 mm
• tusk rise: 180 mm
• bed width in the guides plane: 255 mm
• tailstock sleeve travel: 100 mm
• tailstock transverse travel: ± 10 mm
• DP thread range: 76-1
• number of DP threads: 42 pcs.
• modular thread range: 0.2-36 mm
• number of modular threads: 40 pcs.
• metric thread range: 0.2-36 mm
• number of metric threads: 40 pcs.
• inch thread range: 76-1 zw/1″
• knife shank cross-section: 20×20 mm
• stroke of pull screw thread: 6 mm
• maximum force on the pinion at low cutting speed: 4900 N
• chip cross-section when machining steel (Rm=735 MPa, V=80 m/min): 1.2 mm2
• installed power: 45 kW
• main drive motor power: 4 kW
• cooling pump motor power: 0.12 kW
• power supply: 3x 380 V; 50 Hz
• dimensions (L x W x H): 2300 x 940 x 1400 mm
• machine weight: 1500 kg