HAAS DS-30Y CNC turning center

HAAS DS-30Y CNC turning center was built in 2019 in the United States by HAAS AUTOMATION, INC. The machine, distinguished by the use of state-of-the-art technologies, is an excellent choice for precision machining of workpieces. The turning of workpieces with a maximum diameter of 457 mm is performed on two spindles simultaneously using tools taken from a 12-position turret. Any vibrations and oscillations are in turn eliminated by an extremely rigid bed made of the highest quality raw materials, which ensures high process stability during even the most intense challenges. All this makes the HAAS CNC lathe the right choice for increasing production efficiency in any industrial plant.

The offered DS-30Y dual-spindle lathe has a wide range of equipment, including among others an advanced CNC control, Y axis and measuring probe. The machine has only worked 1467 hours over its service life. The total weight of the machine is 7221kg.

Technical specifications of the HAAS DS-30Y metal lathe

General data

• maximum turning diameter: 457 mm
• maximum bar diameter: 76 mm
• swing over bed: 806 mm
• swing over cross slide: 527 mm
• feed in the X/Y/Z axis: 318/50/584 mm
• rapid traverse in the X/Y/Z axis: 12/12/24 m/min
• thrust force in the X/Y/Z axis: 18.2/10.2/22.7 kN
• number of driven tools: 12
• driven tools rotational speed: 4000 rpm
• driven tools drive power: 9 kW
• positioning accuracy: ± 0.005 mm
• positioning repeatability: ± 0.003 mm
• operating hours: 1467 h
• machine switch-on time: 5667 h
• coolant tank capacity: 208 l
• compressed air pressure: 5.5 bar
• compressed air consumption: 113 l/min
• power supply: 3x 440 V; 50/60 Hz
• weight of the HAAS DS-30Y machine: 7221 kg

Main spindle

• maximum rotational speed: 4500 rpm
• maximum torque (at 600 rpm): 373 Nm
• drive power: 22.4 kW
• bore diameter: 88.9 mm
• chuck diameter: 254 mm
• spindle end: A2-6

Sub-spindle

• maximum rotational speed: 4800 rpm
• maximum torque (at 700 rpm): 149 Nm
• drive power: 14.9 kW
• bore diameter: 51 mm
• chuck diameter: 210 mm
• spindle end: A2-5

Equipment of the HAAS lathe

• CNC controller: HAAS
• Y axis
• sub-spindle
• 12-position turret type BMT65
• driven tools
• automatic tool measuring probe
• HaasConnect system (remote monitoring of machine status via VNC protocol)
• hydraulic 3-jaw chuck with soft jaws on main spindle
• hydraulic 3-jaw chuck with soft jaws on the pick-up
• electronic knob
• possibility of threading without compensation holder
• programmable, pneumatically activated workpiece removal system
• M-code activated chuck blow-off system
• temperature compensation of ballscrews
• possibility of connecting a compressed air system
• cooling system with slide-out coolant tank
• automatic central lubrication system
• early detection of power failure
• CABCOOL cooling for the control cabinet
• workspace illumination