JDM 700-S wicket bag making machine

JDM 700-S wicket bag making machine was built in 2021 in China by JU DING MACHINERY (SHANGHAI) CO., LTD. The machine, designed for the automatic production of film bags with side and bottom sealing, is distinguished by the use of world-brand components. These include two unwinders controlled by PANASONIC inverters, which precisely feed the film into the working area. The film is then accurately measured, cut and sealed accordingly, and holes are made in the finished bags. Once the production process is complete, the bags are transferred to a receiving table, where they are stacked on top of each other to form small packages. The JDM 700S film bag making machine thus offers high quality products with minimum effort. The total weight of the machine is 6500 kg.

The JDM 700 S plastic bag and sack production line is fully complete and consists of the following components:
– PLC controller: PANASONIC
– touch screen control panel: WEINVIEW
– vertical material sealing machine 740 mm, 5 mm, 7 mm, 10 mm, 14 mm, 25 mm
– horizontal material sealing machine 840 mm, 5 mm, 7 mm, 10 mm, 14 mm
– horizontal hole punching machine for making EUROSLOT holes (30x10xR2.5), round holes (6 mm diameter) and V-holes (2×4)
– vertical and horizontal material cooling
– temperature controller (16 pcs.)
– main drive: AC servo motor 5 kW (4 pcs.)
– main drive speed reducer: planetary gearbox (VGM)
– feed drive: PANASONIC AC servo motor 2 kW (2 pcs.)
– unwinder drive: PANASONIC inverter 0.75 kW (2 pcs.)
– unwinding speed reducer 0.4 kW (2 pcs)
– unwinding sensor: CONTEC photocell (4 pcs)
– servo-controlled cutting blade 1 kW (4 units)
– inverter-controlled trimming winder
– AIR TAC pneumatic unit
– DATALOGIC marker and colour sensor
– pneumatic expansion shaft 3″ (2 pcs.)
– MINDMAN solenoid valve
– vertical and horizontal isolation rod (2 pcs.)
– AIR TAC pneumatic actuator
– K-type thermocouple (2 pcs.)
– LANG NING solid-state relay (2 pcs.)
– MEANWELL power switch
– proximity switch (2 pcs.)
– NSK gear bearing
– SCHNEIDER contactor switch in control cabinet
– stainless steel casing of the machine

Technical specifications of JDM 700-S wicket bag making machine

• packaging type: plastic bags with side and bottom sealing
• material type: LDPE, PET, CPP, PP, AL, Nylon etc.
• maximum size of film bag (L x W): 400 x 6500 mm
• minimum size of film bag (L x W): 80 x 80 mm
• maximum material roll width (top unwinder): 700 mm
• maximum material roll diameter (top unwinder): 800 mm
• maximum material roll width (lower unwinder): 1220 mm
• maximum material roll diameter (lower unwinder): 800 mm
• working speed: 30-200 cuts/min
• unwinder working speed: 40 m/min
• throat depth of hole puncher: 200 mm
• installed power: 62 kW
• power supply: 3x 380/415 V; 50 Hz
• dimensions (L x W x H): 11500 x 1893 x 2100 mm
• weight of machine: 6500 kg