KT7 CNC KVPG 150-300 VOLCUT plasma cutting machine

KT7 CNC KVPG 150-300 VOLCUT plasma cutting machine was built in 2020. This extremely powerful machine is the perfect choice for precision cutting of workpieces with a maximum thickness of 50 mm. This is all due to the use of a number of innovative technologies that significantly improve the production processes with maximum ease of operation.

The sheets are machined on a water or other coolant-filled water table by means of two torches (an oxygen torch and a plasma torch). Each torch is equipped with a special TSC (Torch Sensor Control) double-basing system, which protects them from accidental damage. Machining under water in turn eliminates the need for filtration systems, as well as undertaking further secondary processes, i.e. grinding. Furthermore, in order to prevent rust, the KVPG 150-300 VOLCUT plasma-oxygen cutting machine has a fully galvanised design.

The VOLCUT 150-300 plasma cutting machine is offered with, among others, CAM software in Polish and an intuitive PLC control. The total weight of the machine is 820 kg.

Technical data of the KT7 CNC KVPG 150-300 VOLCUT plasma cutting machine

• workpiece thickness (plasma cutting): 0.5-12 mm
• workpiece thickness (oxygen cutting): 6-50 mm
• maximum idle feed speed: 18000 mm/min
• work area (L x W): 3000 x 1500 mm
• work table load capacity: 5000 kg
• power supply: 230 V; 50 Hz
• dimensions (L x W x H): 3880 x 2190 x 1450 mm
• weight of the KT7 CNC KVPG 150-300 VOLCUT machine: 820 kg

Equipment of the SpeedCut 15/30 Compact Silver plasma cutting machine

• operator panel with PLC controller
• CAM software: SheetCam PL
• water table
• plasma source: HYPERTHERM Powermax 65A SYNC
• Torch Sensor Control (TSC) – double-basing system to prevent torch damage
• Rotary Basing Edge (RBE) – innovative sheet metal basing without the need to place the material perpendicular/parallel to the table
• Dynamic Referencing (DR) – a useful procedure for dynamic indication of the 0.0 point when machining non-standard formats.
• Leveling System Chamfering Gates (LSCG) – system for levelling the gantry position in relation to the sheet metal
• Quick Start (QS) – a system ensuring a quick start of the machine in less than 1 minute
• Stop&Go system with simulation of cutting process function
• oxygen torch: HARRIS
• plasma torch
• THC torch height control system
• double-sided drive on toothed bar
• automatic lubrication system for X and Y axis linear guide
• ground and hardened toothed bars and gears