LaserTec FullSet Monolith 265 industrial energy storage system

LaserTec FullSet Monolith 265 industrial energy storage system was built by LaserTec S.A. in Poland in 2023. This highly advanced machine is a key component of a company’s strategic energy management. It allows the storage and management of electricity at the most cost-effective times, bringing tangible savings to the company. The system also plays an important role in stabilising and reducing overloads on the local network, which is particularly important in industrial plants where the continuity of production processes is critical to maintaining operational fluidity.

The FullSet Monolith 265.50h energy storage system accumulates electricity from both photovoltaic installations and the grid. The battery modules made of NMC lithium-ion cells are characterised by timeless durability. Off-grid operation, on the other hand, provides emergency power in the event of power cuts. This solution gives companies energy independence through uninterrupted access to energy, regardless of the market situation or weather conditions. The LT PowerBox energy storage system weighs approximately 3100 kg.

The offer also includes the BSI50HF-02LT bi-directional AC/DC power conversion system, made with SiC technology. Equipped with galvanic isolation and a high-frequency transformer (25 kHz), the unit allows active and reactive power to be controlled, as well as charging and discharging battery banks to the grid.

Technical specifications of the LaserTec FullSet Monolith 265 industrial energy storage system

• nominal energy: 265 kWh
• output voltage range: 500-750 VDC
• maximum discharge current (at 25°C): 150 A
• maximum charge current (at 25°C): 150 A
• number of cycles: ≥8000²
• discharge level (DoD): 80%
• cell type: Li-ion NMC
• cell configuration: 180S4P (12S4P x 15 modules)
• communication interface: CAN Bus, Modbus TCP
• high-current connection between battery blocks: high-current cables
• degree of protection: 20 IP
• certification: UN38.3; CE
• ambient temperature: 0°C/+55°C
• recommended ambient temperature: 25°C
• dimensions (L x W x H): approx. 1800 x 1180 x 2000 mm
• weight of the FullSet Monolith 265 machine: approx. 3100 kg

Technical specifications of the BSI50HF-02LT bidirectional AC/DC power conversion system

General data

• year of manufacture: 2021
• operating mode: bidirectional (charge, discharge)
• control: voltage limit, current limit and DC power limit control
• protections: short-circuit, AC overcurrent, AC/DC overvoltage, undervoltage, thermal circuit, analogue input control
• degree of protection: 21 IP
• efficiency: >94% at nominal values
• ambient temperature: -10°C/+40°C
• dimensions (L x W x H): 640 x 711 x 2180 mm

AC (L1,L2,L3 terminals)

• UAC voltage: 3x 400 V
• frequency: 50 Hz
• rated current IAC: 77 A
• rated power: 50 kW/kVA
• power rate of change: >50 kW/10 s
• overcurrent protection: 3x 100 A gG

DC (DC+,DC- terminals)

• UDC voltage: 500-750 VDC
• maximum charging current: 100 ADC
• maximum discharge current: 100 ADC
• overcurrent protection: 160 A NH1 700 V

RS-485 port

• communication protocol: Modbus RTU
• RS-485 transmission speed: 2400, 4800, 9600, 19200, 38400, 57600, 115200 bit/s

RJ-45 port

• communication protocol: Modbus TCP/IP