OKUMA GENOS M460R-VE CNC machining center

OKUMA GENOS M460R-VE CNC machining center was built in 2016 in Taiwan. This technologically advanced machine was designed with the goal of providing its user high reliability as well as extreme precision, while its extensive machining capabilities will significantly improve any manufacturing process.

One of the many innovative technologies incorporated into the machine is the Machining Navi M-g technology, which computes the most favourable machining parameters for a given job based on an analysis of the acoustic spectrum. The system also levels the vibrations and oscillations that occur at the contact between the tools and the workpiece, resulting in better workpiece surface quality, longer cutting tools life and low load on the main spindle.

In addition, despite the most demanding machining operations, the OKUMA GENOS M460R-VE CNC vertical machining center remains very economical and environmentally friendly thanks to its state-of-the-art Eco-Suite software, which manages the consumption of energy and operating media. As a result, up to 30% energy is saved compared to other machines without such software. The design also includes a thermal compensation system in the form of sensors that analyse the current temperature condition, allowing the controller to automatically respond to changes in the machine geometry.

The OKUMA milling center is offered with an extensive range of equipment, consisting of, among others, the OKUMA OSP-P300M-R CNC control with the One-touch IGF Advance graphical programming support overlay and additional G-CODE functions, a rotary table with 4 axes and a manual tailstock, as well as workpiece and tool measuring probes. The total machine weight is 6500 kg.

Technical specifications of the OKUMA GENOS M460R-VE CNC milling machine

• work table dimensions (L x W): 1000 x 460 mm
• feed rate in the X/Y/Z axis: 762/460/460 mm
• rapid traverse in the X/Y/Z axis: 40/40/32 m/min
• maximum spindle rotational speed: 15000 rpm
• minimum spindle rotational speed: 50 rpm
• rotary table disc diameter: ⌀ 200 mm
• maximum tool length: 300 mm
• positioning accuracy of the X,Y,Z axis: ± 0.004 mm
• positioning repeatability of the X,Y,Z axis: ± 0.0015 mm
• spindle taper: BT40
• spindle torque: 146-199 Nm
• cutting time: 2331 h
• machine switch-on time: 12376 h
• thermal stabilisation system (spindle): TAS S
• thermal stabilisation system (structure): TAS C
• vibration-reducing technology: Machining Navi M-g
• air purge through spindle during tool change
• possibility to set a minimum and maximum drive load for each tool
• connection power: 37.5 kVA
• power supply: 3x 400 V; 50 Hz
• dimensions (L x W x H): 2810 x 2210 x 2746 mm
• weight of machine: 6500 kg

Equipment of the OKUMA GENOS milling center

• OKUMA OSP-P300M-R CNC control with One-touch IGF Advance graphical programming support overlay and additional G-CODE functions
• CAM 3D software: ESPRIT SolidMill
• KITAGAWA TMX200 rotary table with 4 axes and manual tailstock
• workpiece measuring probe: BLUM
• tool measuring probe: BLUM
• Eco-Suite software for operating cost management of the machine
• 32-position tool magazine
• tooling (collets, reduction collets, clamping pins for toolholders, holders, milling chucks, vices, etc.)
• cooling through spindle 15 bar
• chip conveyor
• coolant gun
• handwheel
• Ethernet interface
• RS-232 interface
• USB port (2 pcs)