PONAR ŻYWIEC UT-090 H injection moulding machine

PONAR ŻYWIEC UT-090 H injection moulding machine was manufactured in 2001 in Poland. The machine, designed for plastic injection moulding, is equipped with high-end components, increasing productivity and ensuring high reliability. Located on the body of the injection moulding machine, an operator’s panel with an installed MOOG-BUHL CNC controller allows for complete automation of the injection process and control of parameters.

Moulds with a minimum height of 225 mm, mounted on 615 x 615 mm platens, are closed with a force of 90 tonnes by a hydraulic clamping unit protected by fixed and movable guards. The combination of the high clamping force of the mould, together with a powerful screw with a diameter of 30 mm, guarantees the best quality of the manufactured products. The extensive equipment offered with the UT 090 H injection moulding machine includes a pneumatic plastic feeder and six anti-vibration pads. The total weight of the machine is 5050 kg.

Technical data of the PONAR ŻYWIEC UT-090 H injection moulding machine

• mould clamping force: 90 t (900 kN)
• mould plate size (L x W): 615 x 615 mm
• maximum clearance between plates: 725 mm
• minimum mould height: 225 mm
• maximum mould opening stroke: 500 mm
• screw diameter: 30 mm
• screw stroke: 150 mm
• screw speed: 10-380 rpm
• maximum screw torque: 410 Nm
• clearance between columns: 420 x 420 mm
• injection volume: 106 cm3
• maximum injection performance: 78 cm3/s
• maximum injection pressure: 217.7 MPa
• hydraulic ejector force: 33 kN
• hydraulic ejector stroke: 125 mm
• injection nozzle stroke: 250 mm
• injection nozzle clamping force: 57 kN
• number of heating zones: 3+nozzle
• heating power: 6,1 kW
• motor power: 18.5 kW
• hydraulic system pressure: 17.5 MPa
• power supply: 3x 380 V; 50 Hz
• dimensions (L x W x H): 4500 x 1400 x 2000 mm
• weight of the UT-090 H machine: 5050 kg

Equipment of the injection moulding machine

• CNC controller: MOOG-BUHL
• pneumatic plastic feeder
• anti-vibration pads (6 pcs.)
• valves for cores (2 pcs.)
• hydraulic filters (2 pcs.)
• nest
• nozzle
• insert for clutch
• copies of programs on diskettes (2 pcs.)
• DTR – technical and propulsion documentation