PRIMA POWER PLATINO 1530 laser

The PRIMA POWER PLATINO 1530 laser was produced in 2012 by the Italian company Prima Power. It is equipped with numerical control Primach 20L and a CO2 laser Rofin Sinar DC 025 with a power of 2500 W and a wavelength of 10.6 um. It enables cutting sheet metal with a maximum thickness of 15 mm and dimensions of 3000 x 1500 mm. The gas of the laser cutter consists of He, CO2 and N2. Additionally, the equipment includes Water Chiller HYFRA svk 320-1-s and the Donaldson Torit DCE dedusting system.

Technical parameters of the PRIMA POWER PLATINO 1530 laser cutter

– machine time worked: 24800 hours
– power: 2500.0 W
– CNC control: Primach 20L
– X travel: 3000.0 mm
– Y travel: 1500.0 mm
– working area: 3000 x 1500 mm
– maximum sheet length: 3000.0 mm
– maximum sheet width: 1500.0 mm
– maximum sheet thickness: 15.0 mm
– maximum load on the table: 250.0 kg
– machine length x width x height: 12000.0 mm × 6000.0 mm × 3000.0 mm
– machine weight: 12000.0 kg

Rofin Sinar DC 025 CO2 laser specification

– type: CO₂
– laser: Rofin Sinar DC 025
– power: 2,500 Watt
– power stability: + -2% FS
– wavelength: 10.6 µm
– gas type: He 67.7%; CO2 4.1%; N2 28.2%
– beam propagation factor M2: 250 microseconds, 70 used resolutions
– positioning accuracy: + -150 radians
– operating conditions: maximum / minimum ambient temperature 40 degrees C / 10 degrees C
– relative humidity: <95% non-condensing
– diode laser wavelength: 635 nanometers
– diode laser output power: <1 milliwatt

Cooling:
– required cooling capacity: 31 kW
– Flow Rate: 133 LPM (35 GPM)
– inlet temperature: 18 – 20 degrees C
– maximum inlet pressure: 6 Bar
– nominal inlet pressure: 3 Bar
– pressure difference: 2 Bar
– liquid: distilled water
– filter requirements: 100 microns

CO2 laser dimensions and weight:
– width: 850 mm
– height: 887 mm
– length: 2551 mm
– weight: 1140 kg

Connections:
– water: hose connector 1.25 "
– gas inlet: 6mm tube nipple
– exhaust: 0.5 "pipe nipple
– drain: pipe connector 8 mm 8

Additional parameters and accessories of the PRIMA POWER PLATINO 1530 laser cutter

– compliance with CE standards
– protective cabin
– light barrier
– CE safety
– Water Chiller HYFRA svk 320-1-s
– Donaldson Torit DCE dedusting system