TACCHELLA 4AMP Tool Grinder

The TACCHELLA 4AMP Tool Grinder was built in 2003. It is equipped with a table with dimensions of 900×140 mm and enables grinding of objects with a maximum diameter of 300 mm. Both manual and hydraulic table travel is 400 mm. The spindle is capable of turning at 2200, 3220, 4400 or 6400 rpm. We sell the grinder with extensive accessories, including prisms, a universal vice, a halogen lamp and a balancer with a roller.

Characteristics of the TACCHELLA 4AMP tool grinder

– table dimensions: 140 x 900 mm
– max grinding diameter: 300 mm
– manual table travel: 400 mm
– hydraulic table travel: 400 mm
– maximum distance of the table from the table surface to the axis of the grinding wheel spindle: 345 mm
– manual vertical column travel: 250 mm
– manual transverse table travel: 200 mm
– lift of the tines axis above the table surface: 155 mm
– maximum distance between the tailstock centers: 510 mm
– maximum distance between centers of the gripping head and tailstock: 410 mm
– turning of the grinding wheel spindle in the horizontal plane: + -180 degrees
– the smallest distance of the table from the table surface to the axis of the grinding wheel spindle: 95 mm
– the largest diameter of the grinding wheel: 200 mm
– turning of the grinding wheel spindle in the vertical plane: + -20 degrees
– table turn to the right: 90 degrees
– table turn to the left: 75 degrees
– table speed with hydraulic drive: 0-10 m / min.
– the number of revolutions of the grinding wheel spindle: 2200, 3200, 4400, 6400 rpm.
– electro-mechanical up / down spindle head lifting
– longitudinal, hydraulic and manual table feed
– power of the engine driving the grinding wheel spindle: 1.5 kW
– dimensions of the grinder (width x length x height): 1320 x 1555 x 1430 mm
– machine weight: 1200 kg

Machine Tooling

– a dividing head with a drive
– handle: fi 125
– left and right jaws
– handle key
– permanent magnet (new, 500×200 mm)
– balancer with a roller
– right tailstock
– a device for disc cutters
– device for dressing discs
– grinding wheel covers: 4 pcs.
– cover with a hood for the absorber
– cover for the dividing head with drive
– cover for the water unit
– universal vice
– prisms: 2 pcs.
– a device for setting the center of a detail
– nuts for dividing head: 3 pcs
– tool pulley
– pins for covers: 3 pcs.
– cockles for rolls: 8 pcs
– grinding pins: 5 pcs.
– sliding device
– device for setting the center
– suction cup for pins for the absorber
– grinding wheels (approx. 30 pcs. + 3 pcs. diamond blades)
– lubricator
– hose to the canister
– dust absorber
– cooling water unit
– covers (electropump)
– 24V transformer
– tool on the helical line for milling cutters + controller
– readings in two axes
– halogen lamp
– Technical Documentation