The TSUGAMI M08SYE-II CNC lathe was built by Tsugami Corporation in Japan in 2018. The machine is equipped with a main spindle and a counter spindle. The turret of the lathe has 12 driven tools. Together with the Tsugami M08SYE-II lathe, the IEMCA Master 865 Verso MP barfeeder is offered. The feeder is fully equipped with all available channels and sleeves for all bar diameters, a full range of diameters can be processed.
Technical parameters of the CNC TSUGAMI M08SYE II lathe
– CNC control: Fanuc 0iTD
– maximum turning diameter: fi 280 mm
– diameter of the bar fed through the spindle: fi 65 mm
– turning length: 380 mm
– number of axles: 6
– X axis travel: 221 mm
– Z axis travel: 400 mm
– Y axis travel: 100 mm (+/- 50 mm)
– passage in the W axis (intercept): 506 mm
– travel along the C1 / C2 axis: 360 degrees (every 0.001 degrees)
– X / Z axis drive power: 1.8 kW
– Y axis drive power: 1.8 kW
– A axis drive power: 1.2 kW
– in X / Y axes widely spaced sliding guides with a large rectangular cross-section; in the Z axis roller (roller) guides
– rapid traverse in the X axis: 24 m / min.
– rapid traverse in the Z axis: 27 m / min.
– rapid traverse in the A axis: 30 m / min.
– rapid traverse in the Y axis: 12 m / min.
– machine height: 1930 mm
– occupied area: 2470 x 1850 mm
– machine weight: 5900 kg
Lathe spindles TSUGAMI M08SYE II
Main spindle
– rotational speed: 4500 rpm.
– spindle nose: JIS A2-6
– front bearing diameter: fi 100 mm
– spindle bore diameter: 73 mm
– engine power (30 min./constant): 11 / 7.5 kW
Sub spindle
– rotational speed: 4500 rpm.
– spindle tip: flat, fi 140 mm
– front bearing diameter: fi 80 mm
– spindle hole diameter: fi 59 mm
– engine power (30 min./constant): 7.5 / 5.5 kW
TSUGAMI M08SYE-II lathe tool head
– head type: M-V12 NC, radial setting
– number of tools: L / M: 12, each driven position
– tool shaft height: 25 mm
– shaft diameter: fi 40 mm
– tool drive rotation speed: 5000 rpm.
– motor power of driven tools: 3.7 kW
– torque of driven tools: 23.5 / 14 Nm (15 min / 30 min)