AGIE AGIECUT CLASSIC 2S wire EDM machine

The AGIE AGIECUT CLASSIC 2S wire EDM machine was built in 2003 by the Swiss company AGIE. The machine allows difficult and complex shapes to be obtained by means of electrical erosion during workpiece machining. The AGIECUT CLASSIC 2S wire EDM machine processes a detail with dimensions (L x W x H) of 750 x 550 x 250 mm and a weight of 200 kg (immersed) or 450 kg (rinsing). The feeds of the EDM machine in the X / Y / Z axes are 320, 250 and 256 mm, respectively. The machine is equipped with a wire with a diameter of 0.2 – 0.33 mm, which has an electrical voltage from 0 to 25 N. The total weight of the EDM machine is 2580 kg.

Technical data of the AGIE AGIECUT CLASSIC 2S wire EDM machine

– maximum dimensions of a detail (length x width x height): 750 x 550 x 250 mm
– maximum workpiece weight (immersion / rinsing): 200/450 kg
– maximum feeds in the X / Y / Z axes: 350/250/256 mm
– auxiliary table travel (U axis x V axis): 70 x 70 mm
– wire tension: 0 – 25 N
– wire diameter: 0.2 – 0.33 mm
– maximum cone angle: +/- 30 degrees
– maximum thickness of the cone: 100 mm
– V conductor: 0 degrees – 2 degrees
– operating voltage: 3x 400 V / 50Hz
– rated current: 14 A
– total weight of the AGIECUT CLASSIC 2S wire EDM machine: 2580 kg