CORMAK VOLCUT 4000×2000 plasma cutting machine

CORMAK VOLCUT 4000×2000 plasma cutting machine built in 2019 is used for precision cutting of steel and aluminium sheets. In the machining process, the machine uses a fully automated plasma torch with a special dual-base Torch Sensor Control (TSC) system. This system protects the torch from damage and ensures uninterrupted cutting throughout its lifetime. The actual cutting of the workpieces takes place under a water sheet on a large work table with a length of 4000 mm and a width of 2000 mm, without the need for filter systems.

To prevent rust and guarantee trouble-free operation, the machine’s compact design and all of its components have been fully galvanised. In addition, the offer price also includes an extensive range of equipment, consisting of, among others, CAD/CAM software and a reliable plasma source by HYPERTHERM. The CORMAK plasma cutting machine was switched on for 445 hours, during which it worked for just 46 hours. The total weight of the machine is 1300 kg.

Technical specifications of CORMAK VOLCUT 4000×2000 plasma cutting machine

• work area dimensions (L x W): 4000 x 2000 mm
• maximum workpiece weight: 10000 kg
• feed in Z axis: 200 mm
• travel speed: 18000 mm/min
• travel height: 200 mm
• waterbed table with 1600 litre capacity
• machine switch-on time: 445 h
• plasma beam emission time: 46 h
• power supply: 230 V; 50 Hz
• dimensions (L x W x H): 4880 x 2490 x 1450 mm
• weight of machine: 1300 kg

Equipment on the VolCut 20/40 plasma cutting machine

• control panel with touch screen display and CNC controller
• CAD/CAM software
• plasma source: HYPERTHERM POWERMAX 85
• Leveling System Chamfering Gates (LSCG) – a system that levels the gantry position relative to the sheet metal without having to lay the material perpendicular/parallel to the table
• Torch Sensor Control (TSC) – double-basing system to prevent torch damage
• Rotary Basing Edge (RBE) – innovative sheet metal basing without the need to place the material perpendicular/parallel to the table
• Dynamic Referencing (DR) – a useful procedure for the dynamic indication of the 0.0 point when machining non-standard formats
• Stop&Go system with simulation of cutting process function
• Quick Start (QS) – a system ensuring a quick start of the machine in less than 1 minute
• automatic lubrication system
• double-sided gate drive