MITSUBISHI ML3015EX(S2)-45CF-R laser

The MITSUBISHI ML3015EX(S2)-45CF-R laser was built in 2014. The laser cutter is constantly serviced. The price of the laser includes Lantek Expert software and a new head. The laser source has a power of 4.5 kW and enables cutting thick sheets. Two tables enable continuous work.

Technical parameters of the MITSUBISHI ML3015EX S2-45CF-R laser

– laser power: 4.5 kW
– laser type: CO2
– man-hours: approx. 17,000 h
– control: simultaneous 3 axes (X, Y, Z), sensing the height of the Z axis is also possible
– maximum dimensions of the element to be processed: 3050 x 1525 mm
– weight of the loaded pallet: 950 kg
– workpiece support section height: 880 mm
– pallet change time: approx. 25 seconds
– number of pallets: 2
– X axis feed: 3100 mm
– Y axis feed: 1550 mm
– Z axis feed: 150 mm
– rapid feed (X, Y axis), speed: maximum 100 m / min. (48 in manual mode)
– maximum feed speed: 50 m / min.
– positioning accuracy: 0.05 / 500 mm (X / Y axis), 0.1 / 100 mm (Z axis)
– repeatability: + -0.01 mm (X, Y axis)
– machine weight: 10700 kg

MITSUBISHI Laser Resonator

– resonator: 45CF-R
– supply voltage: 3-phase alternating current
– power frequency: 200V + -10%, 50Hz; 200V + -10%, 60Hz; 200V + -10%, 60Hz
Device powered for the treatment device system:
– power supply capacity: 77 kVA
– rated current of the residual current device: 225A
– sensitivity of the rated current of the residual current device: 500mA
– screw size of the powered terminal block: M12 (power line), M8 (ground line)
Powered unit for the cooling unit system:
– power supply capacity: 32 kVA
– rated current of the residual current device: 150A
– weight: 2200 kg

Water chiller

– type: SVK 720 / 1- Mitsubishi
– refrigerant gas: R410A
– nominal ambient air: 40 degrees C
– refrigerant temperature: 10 degrees C
– refrigerant capacity: 76,000 W
– minimum ambient air: 10 degrees C
– maximum ambient air: 42 degrees C
– minimum refrigerant temperature: 10 degrees C
– maximum refrigerant temperature: 40 degrees C
– evaporator material: stainless steel
– temperature control: electronic, direct
– temperature display: digital
– total power consumption: max. 40.4 kW

Pallet changer for laser cutter

– element size, maximum loading dimension: 3,050 x 1,525 mm
– maximum pallet loading: 950 kg
– support height (from the ground): 880 mm
– pallet change time: approx. 25 sec.
– number of pallets: 2
– dimensions (height x length x width): 3.530 x 2.260 x 890 mm
– weight: approx. 2100 kg