The TRUMPF TRULASER 1030 FIBER laser cutter was manufactured in 2015 in the United States. The machine uses a TRUDISK 2001 laser source with a power of 2 kW, which allows cutting sheet metal with a maximum thickness of 12 mm. The cutter can also be used to quickly and accurately cut aluminum (maximum thickness 5 mm), bronze (maximum thickness 3 mm), copper (maximum thickness 2 mm) and foiled stainless steel (maximum thickness 6 mm). The table of the laser cutter has dimensions of 1500×3000 mm, and the laser is able to process the sheet metal at a speed of 40 m / min.
Cuting time only : 2100 hour (machine worked very little)
Power on time : 35000 hour
Technical parameters of the TRUMPF TRULASER 1030 FIBER laser
– type of laser source: TRUDISK 2001
– laser power: 2000 W
– laser wavelength: 1030 nm
– X axis: 3078 mm
– Y axis: 1550 mm
– Z axis: 76 mm
– maximum sheet thickness of mild steel: 12 mm
– maximum thickness of stainless steel sheet: 6 mm
– maximum thickness of aluminum sheet: 5 mm
– maximum thickness of copper sheet: 2 mm
– maximum thickness of bronze sheet: 3 mm
– table surface: 1.5 x 3 m
– control system: B&R Automation PC 820
– type of drive: maintenance-free 3-phase motors
– maximum cutting speed: 40 m / min
– cutting acceleration: 2m / s2
– positioning acceleration: 9 m / s2
– the smallest programmable dimension of the road: 0.001 mm
– position difference: + -0.1 mm / m
– average position spread: + -0.03 mm
– network: 400 V / 50 Hz
– connection power: 26 kVA
– control voltage: 24 V
– necessary protection for 400 V / 460 V: 45 A
– compressed air consumption: standard cutting 333 l / min or cutting with compressed air 500 l / min
– compressed air connection: 7-12 bar
– N2 nitrogen connection: 27 bar
– O2 oxygen connection: 15 bar
– average power consumption during production: 10 kW
– machine dimensions (length x width x height): 7909 x 2689 x 2297 mm
– machine weight: 8730 kg
– cuting time: only 2100 hour (machine worked very little)
– power on time: 35000 hour