CNC GILDEMEISTER CTX 320 LINEAR turning center

The CNC GILDEMEISTER CTX 320 LINEAR turning center was built in 2002. The turning center is equipped with 12 powered tools and a counter spindle. The CTX 320 lathe uses the Siemens 840D CNC control, which enables easy programming of the machine.

Technical data of the CNC turning center GILDEMEISTER CTX 320 LINEAR

– CNC control: SIEMENS 840D + PCU 50
– pin nose: FL 140 h5
– maximum spindle speed: 6000 min-1
– revolutions at constant power: 1000-6000 min-1
– greatest torque, 100% S1: 155 a 1000 N-m / min-1
– greatest torque, 40% S6: 200 a 1000 N-m / min-1
– spindle power, 100% S1: 16 kW
– spindle power, 40% S6: 20 kW
– self-centering chuck, diameter: 170 mm
– spindle bore diameter: 68.5 mm
– front bearing diameter: 100 mm
– cylinder stroke verification system: linear magnetic
– handle pressure setting system: proportional valve with CNC
– maximum operating pressure: 60 bar
– tank capacity: 11 L
– pump capacity: 16 l / min-1
– maximum installed power: 27 kVA
– voltage: 400 V
– frequency: 50 Hz
– dimensions of the machine with a conveyor: 3905 x 1553 x 1830 mm
– machine weight: approx. 3500 daN

Working area of ​​the GILDEMEISTER CTX 320 LINEAR CNC lathe

– center distance: 600 mm
– turning diameter over the bed: 400 mm
– turning diameter over the slide: 300 mm
– turning diameter: 246 mm
– stick capacity: 50 mm
– Z axis travel: 450 mm
– X axis travel: 210 mm

Axis drive type

– Z axis ball screws (D x P): 32 x 15 mm
– X axis drive: synchronous linear motor
– rapid feed of the Z axis: 45 m / min.
– rapid feed of the X axis: 60 m / min.
– rapid feed of the C1 axis: 200 min-1
– C1 axle torque: 155 Nm
– Z axis load: 4000 N
– X axis load: 2500 N
– number of axles: 2 (4)

Measurement system

– Z axis measurement system: rotational absolute
– X axis measuring system: absolute optical line
– X and Z linear axes: 0.001 mm
– C axis: 0.001 degrees

Tailstock

– travel of the tailstock tusk: 400 mm
– tailstock tusk movement: CNC controlled, hydraulic
– maximum tailstock pressure: 4000 N

Tool holders

– number of powered tools: 12
– tool holder: 30 VDI
– tool holder cross-section: 20 x 20 mm
– speed of driven tools: 5000 min-1
– power of driven tools: 10 kW
– moment of mechanized tools: 20 N-m