CNC machining center DUGARD EAGLE 850

The CNC machining center DUGARD EAGLE 850 was manufactured in 2012. The Dugard EAGLE 850 is equipped with a Fanuc 0iMD CNC control and a tool magazine for 24 tools. The spindle of the milling center enables operation at a speed of 10,000 revolutions per minute and can machine workpieces with a maximum weight of 500 kg on a table with dimensions of 1000 x 510 mm.

Technical data of the CNC machining center DUGARD EAGLE 850

– CNC control system: Fanuc Series 0iMD
– table dimensions: 1000 x 510 mm
– maximum table load: 500 kg
– T-slot, quantity x size x spacing: 5 x 18 x 100 mm
– X axis travels: 850 mm
– Y axis travels: 530 mm
– Z axis travel: 510 mm
– distance of the spindle tip to the table axis: 150-660 mm
– distance of the spindle axis to the column: 585 mm
– spindle taper: ISO 40
– spindle power (constant / 30 min.) kW 11/15
– maximum spindle speed: 10,000 rpm.
– rapid feeds in the X, Y, Z axes: 30/30/24 m / min.
– feed rate X, Y, Z: 1-10000 mm / min.
– X, Y, Z axis guides: rolling blocks
– positioning accuracy P (according to VDI 3441) mm P 0.005 Repeatability Ps (according to VDI 3441) mm Ps 0.003
– tool magazine: 24 tools
– tool holder type: BT40 (option SK40)
– type of magazine: with intermediate claw
– maximum tool diameter: 80 mm
– maximum tool length: 300 mm
– maximum tool weight: 7 kg
– tool change time (T-T, C-C): 2.0-4.5 s
– power demand: 15 kVA
– compressed air demand: 5 bar, 200 l / min.
– required area (L x W x H): 2.30 x 2.12 x 2.58 m
– machine weight: 5550 kg

Equipment of the DUGARD EAGLE 850 milling center

– spindle: 10,000 rpm, with a cooler (liquid cooling)
– drum tool magazine with an intermediate foot: 24 positions
– CNC control system: Fanuc 0iMD
– rigid tapping
– functional fishing rod with a knob
– automatic lubrication system
– spindle blow-off
– external tool cooling system with coolant
– external tool cooling system with compressed air
– chip flushing system
– coolant flush gun
– compressed air gun
– a set of tool wrenches, bolts and foundation washers
– full development of the working space
– lighting of the working space
– machine status lights (3 colors)
– preparation for installation of the 4th axis (wiring) and cooling p / spindle
– an excerpt from the Operation and Maintenance Manual of the control system