Milling center DUGARD EAGLE 1000 VMC

Milling center DUGARD EAGLE 1000 VMC was built in 2002 by the English company C Dugard Ltd. The CNC milling machine is equipped with Siemens numerical control and a table with dimensions of 1200×450 mm with a maximum load of 600 kg. The spindle of the machine rotates at a speed of 80-8000 rpm.

Characteristic parameters of the DUGARD EAGLE 1000 VMC CNC milling machine

– CNC control: SIEMENS
– table size: 1200 x 450 mm
– table load: 600 kg
– T-slots: 5 x 18 x 75 mm
– X axis travel: 1020 mm
– Y axis travel: 510 mm
– Z axis travel: 510 mm

Spindle:
– spindle taper: 7/24, BT-40
– spindle speed: 80-8000 rpm
– overhang, distance from the center of the spindle to the body: 550 mm
– distance from the spindle face to the table: 150-660 mm

Feeds:
– working feeds: 1-7600 mm / min.
– accelerated feeds of the X, Y, Z axes: 30/30/18 m / min.

Accuracy:
– repeatability: + -0.003 mm
– positioning accuracy: + -0.005 mm

Tool magazine:
– tool magazine: 20, carousel type
– maximum tool diameter: 89 mm
– maximum tool weight: 7 kg
– tool holder: BT-40

Engine:
– spindle motor (30 min.): 16 HP; 12 kW
– drive motor (X, Y, Z): 5.6 HP; 4.2 kW
– coolant pump: 0.38 kW

Other data of the machining center DUGARD EAGLE 1000VMC:
– required machine power: 15 kVA
– voltage: 3-phase, 380/400 V
– frequency: 50/60 Hz + – 1 Hz
– voltage tolerance: + – 10% or less
– Air required: 80 PSI, 5 kg / cm2
– usable area (L x W x H): 2830 x 2741 x 2532 mm
– machine weight: 5000 kg